产品详细
608

本品系采用优质的水性乳液、增粘树脂、多种助剂,经过严格的科学配方和先进的生产工艺精心制作而成的一种高性能粘胶。

1、外观:乳白色粘稠状液体

2、适用范围:

本品适宜于各种纸的对裱、PVC贴窗的强力粘接,也适用于各种牛皮箱的粘接、铜卡纸对裱。

3、产品特性:

1)涂刷性能好,全粘时间十分钟,四小时完全固化。

2)胶膜柔韧,对PVC、各种牛卡面的熔透性好、粘接强度大。

3)本品抗冷耐热性能佳,粘合好的产品在60℃烘烤72小时或-20℃冷冻72小时粘接强度保持不变,产品不爆,胶膜不发脆。

4、施工方法:手刷、机糊通用胶

5、技术参数:

1)固含量≥45%

2)粘度=5000-7000mpa.s

3pH=5-6

6、使用注意事项:

1)对于挺度太大的产品,粘合后要求至少压榨半小时,并且压力要足够,使两被粘面能够充分贴合。

2)使用本品的产品质量涉及诸多因素,用户应在使用前视产品的具体情况进行试用,合格后方可批量生产。

7、贮存运输:

1)本品应密封存放于阴凉干燥通风处,贮存温度为5-35℃为宜,有效贮存期为一年,超过贮存期如检验合格仍可使用。

2)本品为水分散体,属于非危险品,可按普通物品办理运输。

免责条款

由于货品的使用、操作、贮存以及运输等均不受本公司操控,本公司对货品的使用性能、效果及适用性均不负责。本公司的任何职员或代表均无权改动或放弃本条款,如贵公司未能接受此项免责条款,请将货品原装退回。

This product uses the high quality water-based emulsion, viscosity resin, a variety of additives, through rigorous scientific formula and advanced production process carefully made of a high-performance adhesive.

1, Appearance: milky white viscous liquid

2, Scope:

This product is suitable for a variety of Kraft adhesive, copper jam on the mounted.

3, the product features:

(1) brushing good performance, the whole stick time ten minutes, four hours to fully cure.

(2) film flexibility, a good variety of Kraft adhesive properties.

(3) The product good heat resistance, cold resistance, adhesion good product baking 72 hours or frozen at -20 60 72 Hour

bonding strength remains the same, the product is not explosive, film is not brittle.

4, the construction method: Hand brush, paste Universal machine

5, the technical parameters:

(1) Solid content 50%

(2) Viscosity = 5000-6000mpa.s

(3) pH = 5-6

6 ,Caution:

(1) the product is too large for the stiffness, the press after bonding requires at least half an hour, and the pressure should be sufficient so that the two surfaces to be glued can be sufficiently bonded.

(2) the FDA product quality involves many factors, you should use depending on the product prior to the specific circumstances of the trial conducted before mass production after passing.

7, storage and transportation:

(1) This product should be sealed in a cool dry place, storage temperature is 5-35 is appropriate, effective storage for one year, over the storage period can still be used as passing inspection.

(2) This product is an aqueous dispersion, a non-dangerous goods, according to general goods for transportation.

Disclaimer:

The company is not responsible for the performance, effect and applicability of the goods due to the use, operation, storage and transportation of the goods.No staff or representative of the company has the right to amend or waive this clause. If your company fails to accept the exemption clause, please return the original shipment.