产品详细
上光油

本品系采用优质的水性乳液、增粘树脂、多种助剂,经过严格的科学配方和先进的生成工艺精心制作而成的一种高性能光油。

外观:半透明液体

适用范围:适用于食品包装、鞋类、电子电器、医药、烟酒等高档包装。

产品特性:环保、高光泽度、高耐磨、保光性久、干燥速度快、抗冻性强。

施工方法:使用前必须充分搅拌均匀,保持内在成分均一,开启后贮存应加盖封好,上油量应以满足纸面为原则及纸张的品质、光泽度要求而定。

技术参数:

固含量:42±2% 

PH值:7.5-8.5

光泽度:70±5  60°

粘度:45-60秒(25℃涂4杯)

耐磨性:200次(4.5磅压力)

使用方法及注意事项:

依据使用条件适量加入稀释剂(水)或酒精与水的混合液,上光12小时后,光油的各项性能才能达到最佳状态。

贮存运输:

20KG/桶,贮存温度为5-35℃为宜。本品为水溶性液体,属于非危产品,可接普通物品办理运输。


免责条款

由于货品的使用、操作、贮存以及运输等均不受本公司操控,本公司对货品的使用性能、效果及适用性均不负责。本公司的任何职员或代表均无权改动或放弃本条款,如贵公司未能接受此项免责条款,请将货品原装退回。


This product uses the high quality water-based emulsion, viscosity resin, a variety of additives, rigorous scientific formula and advanced craft crafted into a high performance light oil.

Appearance: translucent liquid

Application: suitable for packaging, footwear, electronics, medicine, tobacco and alcohol etc.

The product features: environmental protection, high gloss, high wear resistance, high gloss, quick drying and anti-freezing.

Construction method: must be fully stir well before use, maintain internal homogeneous, open after the seal shall be affixed to the storage, oil amount should be based on principles of satisfy paper and paper quality, gloss.

Technical parameters:

Solid content: 42±2% 

PH: 7.5 - 8.5

Gloss: 70 + 5 60 °

Viscosity: 45 to 60 seconds (25 tu 4 cups)

Wear resistance: 200 times (4.5lb)

Use methods and considerations:

Apply proper amount to the mixture of diluent (water) or alcohol and water, and the performance of light oil will be optimum in 12 hours.

Storage transportation:

20 kg/barrel, storage temperature for 5 to 35 advisable.This product is water soluble liquid, belongs to the non-critical product, It can be accept common goods to handle transportation.

Disclaimer:

The company is not responsible for the performance, effect and applicability of the goods due to the use, operation, storage and transportation of the goods.No staff or representative of the company has the right to amend or waive this clause. If your company fails to accept the exemption clause, please return the original shipment.